eximtimes.com
www.eximtimes.com

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO. 52 (RE- 02)/ 2002-2007

NEW DELHI : DATED : 05/12/2002.

            Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and  Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2.       In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3.       In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4.       In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

            After the existing entry at Sl.No.A-3109,  new entries at Sl. No.  A-3110 to A-3117  shall be added as per Annexure  ”B”  to this Public Notice.

ENGINEERING PRODUCTS

            After the existing entry at Sl.No.C-1825, new entries at Sl.No.C-1826  to   C-1841 shall be added as per Annexure  ”C”  to this Public Notice.

-:2:-

PLASTICS GOODS

            After the existing entry at Sl.No.H-512, new entries   at   Sl. No.  H-513 to H-516 shall be added as per Annexure  ”D”  to this Public Notice.

SPORTS GOODS

            After the existing entry at Sl.No.I-41, new entries   at   Sl. No.  I-42  to I-47 shall be added as per Annexure  ”E”  to this Public Notice.

This issues in public interest.

     ( L. MANSINGH )

            DIRECTOR GENERAL OF FOREIGN TRADE

       (R. C. SAINI)

      DY. DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE


-:3:-

Annexure “A” to the

Public Notice No. 52

Dated: 05/12/2002

AMENDMENTS/CORRECTIONS

Sl.

No.

Page

No.

Reference

Amendments/Corrections

1

2

3

4

1.

147

Chemicals & Allied Products

Sl.No.A1062

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A1062

1 Hydroxyethylidene 1:1 Di Phosphoric Acid 60%

1 kg

1.     Phosphorous Trichloride

              OR

      Yellow Phosphorous

       Chlorine

2.     Acetic Acid Galcial

0.828 kg

0.189 kg

0.654 kg

0.182 kg

2.

156

Chemicals & Allied Products

Sl.No.A1204

The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“Phenol”

3.

159

Chemicals & Allied Products

Sl.No.A1242

The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“Denatured Ethyl Alcohol”

4.

169

Chemicals & Allied Products

Sl.No.A1385

The description of export item shall be amended  to read as under:-

“Methyl Amino Propyl Amine / 3 Methyl Amino Propyl Amine”

-:4:-

5.

172

Chemicals & Allied Products

Sl.No.A1419

1.              The description of export item shall be corrected to read as under:-

“N- (1, 3 Dimethyl Butyl)-N- Phenyl-P- Phenylene Diamine”

2.              The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-

“Para Amino Diphenyl Amine”

6.

177

Chemicals & Allied Products

Sl.No.A1476

The description of import item Ethyl Alcohol appearing at Sl. No. 2, (without any change in quantity) shall be amended to read as:-

“Denatured Ethyl Alcohol”

7.

191

Chemicals & Allied Products

Sl.No.A1598

The description of export item shall be       corrected by the following:-

“Amino Trimethylene Phosphonic Acid (50%strength)”

8.

269

Chemicals & Allied Products

Sl.No.A2111

The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as:-

“Refined Naphthalene”

9.

289-290

Chemicals & Allied Products

Sl.No.A2263

The description of import item at Sl. No. 13, (with quantity) shall be amended to read as under:-

“Isopropyl Alcohol/        -      12.37 kg/kg

  Ethyl Acetate/Absolute

  Alcohol”

10.

312

Chemicals & Allied Products

Sl.No.A2439

The description of import item at Sl. No. 1(a), (without any change in quantity) shall be amended to read as:-

“Denatured Ethyl Alcohol”

-:5:-

11.

332

Chemicals & Allied Products

Sl.No.A2605

The description of export product shall be amended to read as under:-

“Imazethapyr 5% SL (Pursuit 50A)”

12.

340

Chemicals & Allied Products

Sl.No.A2686

The norm covered by this entry shall be re-stored by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2686

Dimethyl Amine Hydrochloride

1 kg

1.    Methanol

0.868 kg

13.

342

Chemicals & Allied Products

Sl.No.A2699

The description of import item at Sl. No. 1, shall be amended to read as:-

“Refined Naphthalene”

14.

345

Chemicals & Allied Products

Sl.No.A2724

The norm covered by this entry shall be deleted.

15.

367

Chemicals & Allied Products

Sl.No.A2905

The description of export item shall be       amended to read as under:-

“2,6 Di-tertiary Butyl Paracresol (Butylated Hydroxy Toluene)”

16.

22

Chemicals & Allied Products

Sl.No.A3095 (notified vide Public Notice No. 46 Dated:06/11/2002)

The description of export item shall be       amended to read as under:-

“Sterile Ceftazidime/ Ceftazidime Pentahydrate USP”

-:6:-

17.

479

Engineering Product

Sl.No.C2

The description of import item at Sl. No. 1(a), (with quantity) shall be substituted by the following:-

                         “OR

1a) Aluminium Ingot/    -          1.04 kg

      T Bars/Sows/Billets

                           OR

 a) Aluminium Scrap     -          1.05 kg       

18.

481-482

Engineering Product

Sl.No.C22

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C22

Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at C-1749

1 kg

1.    Aluminium Scrap

2.    Aluminium Ingot

3.    Aluminium Sheet/ Coils

4.    Aluminium Circle

1.22 kg/kg content of Aluminium in export product

1.18 kg/kg content of Aluminium in export product

1.15 kg/kg content of Aluminium in export product

1.07 kg/kg content of Aluminium in export product

-:7:-

19.

541

Engineering Product

Sl.No.C303, C304, C305, C306 & C307

The norms covered by these entries shall be deleted.

20.

572-576

Engineering Product

Sl.No.C446

After the description of import item at Sl. No. 96, the following additional import items (with quantity) shall be added:-

“97.Sensors                     -      Net to net

 98.linear Transducer      -      net to net

     /VDO Pressure

    Transducer             

99. Thrust Ball Bearing   -     Net to net

      Spherical Roller       

      Bearings, Bush

      Bearing, Wheel Flange

      Rollers etc.

100.Various Switches      -    Net to net

      such as Rotary

101.Drive such as            -    Net to net

       Converters

102.Non Alloy Round     -   1.05 kg/kg

      Stock/ Bar                       content in 

                                              Export

                                              Product

103.Steel Pipe                  -   1.02 kg/kg

                                              content in

                                              Export

                                              Product

104.Hydraulic Cylinder   -    Net to net

105.Band Heters              -    Net to net

106.Various Types of       -   Net to net

       Seal Kits

107.PVC Tubing               -   1.02 kg/kg

                                               content in 

                                              Export

                                              Product

-:8:-

   

 

108.Water Filter-cum-      -   Net to net

       Regulator Assy

109.Cam Follower/           -   Net to net

       Roller

110.Thread Guide             -   Net to net

111.S.S. Filter Belts          -   Net to net

112.Coil                            -   Net to net

113.Encoder/Encoder       -   Net to net

       Cables

114.Flow Meter            -      Net to net

115.Servo Valve           -      Net to net

       Assembly/ Actuator

116.Various machined  -      Net to net

        Mechanical Parts

117.Control Panels        -     Net to net

118.Extruder Screw       -     Net to net

119.Extruder Barrel       -     Net to net

120.Air Compressor       -     Net to net

121.Filter Elements/       -     Net to net

       Suction Filters

122.Pressure Gauge/       -    Net to net

       Indicator/Oil Gauge

123.’O’ Rings                 -    Net to net

124.Thermo Meters/Bi    -   Net to net

        Metal Thermo Meter

125.Terminal Blocks       -   Net to net

126.Hose Union               -   Net to net

127.Universal Elbow/      -   Net to net

       Joint

128.Accumulator             -   Net to net

129.Scrapper                    -   Net to net

130.Programmer              -   Net to net

131.High/Low Pressure   -   Net to net

       Elements

132.MMC Units              -    Net to net

133.Motor Protection      -    Net to net

       Controller

134.Programmable Logic -   Net to net

       Controller

-:9:-

21.

579-580

Engineering Product

Sl.No.C459

The description of export item shall be amended to read as under:-

“Alloy Steel (other than Stainless Steel and High speed steel), Bars and Rods  (Including Rounds, Flats, Hexagons, Octagon, Wire Rods etc.) Angles, Shapes and sections (including Special Profiles) Plate / Sheets / Strips / Wide Coils / Blooms / Billets / Slabs / Ingots containing 2% or more alloying elements.”

22.

585

Engineering Product

Sl.No.C469

The description of export item shall be amended to read as under:-

“Cold Rolled Galvanised Colour Coated Non-Alloy Steel Sheets / Hoopand Strips / wide coils having zinc coating of 180 gm per Sq.m @ 40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq. Mtr. Per litr. as Backer given in Engineering Table 1”

23.

585-586

Engineering Product

Sl.No.C470

The description of export item shall be amended to read as under:-

“Cold Rolled Full Hard / Cold Rolled Close Annealed (without skin passed/ temper passed) Non-Alloy/ Alloy Steel (excluding Stainless Steel ) Sheets/ Hoops & Strips / Wide Coils”

24.

586

Engineering Product

Sl.No.C471

The description of export item shall be amended to read as under:-

“Cold Rolled Close annealed (CRCA) Skin passed / Temper passed (Including Half Hard, Quarter Hard) Non-Alloy / Alloy Steel (excluding Stainless Steel) Sheets/ Hoop & Strips / Wide Coils”

-:10:-

25.

601-603

Engineering Product

Sl.No.C511

The description of export item shall be amended to read as under:-

“Non-alloy / Alloy / Stainless Steel bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire Rod, Cold twisted deformed bars, thermo-mechanically treated reinforcing bars etc.) Angles, Shapes and sections (including Beams, Joists, Channels Special profiles etc.), Plates / Sheets /Strips/ Wide coil / Blooms / Billets/ Slabs and Ingots”

26.

614-616

Engineering Product

Sl.No.C525

The description of export item shall be amended to read as under:-

“Stainless Steel bars and Rods (including Rounds, Flats Hexagons, Otagons, wire rods, etc.) Angles, Shapes and sections (including beams, Joists, Channels, special profiles, etc.), Plates / Sheets / Strips/ wide coils/ Blooms/ Billets/ slabs/ Ingots in any condition/ finish whether cast, hot rolled/ cold rolled, forged or cold finished/ cold drawn”

27.

617

Engineering Product

Sl.No.C527

1.              the description of import item at Sl. No. 7(a) (without any change in quantity) shall be amended to read as under:-

“7(a). Used / New Plastic / Steel Bobbins / Spools”

2.              In the Note No. 1, the words appearing as  “below 1 mm only” shall be substituted by the following:-

“below 1.6 mm only”

-:11:-

28.

626

Engineering Product

Sl.No.C601

The description of import item at Sl. No. 1, shall be amended (without any change in quantity) to read as under:-

“Cold Rolled Non-alloy Steel  Sheet/Strip/Wire Coils (prime seconds / defectives)”

29.

657

Engineering Product

Sl.No.C829

The Note No. 1, below this entry shall be added:-

“Note: 1. Import of handle may also be allowed on net to net basis with accountability clause where the product is exported alongwith the handle”

30.

838

Engineering Product

Sl.No.C1630

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1630

Galvanised Steel Flexible Tube / Pipe (conduit) with PVC coating

1 kg

1.                     Low carbon MS defective coils/ Sheets

2.                     Zinc

3.                     PVC compound (granules)

1 kg/kg content in the export product

0.025 kg content in the export product

1.05 kg/kg content in the export ptoduct


-:12:-

31.

841

Engineering Product

Sl.No.C1645

The description of import items  shall be amended (with quantity) to read as under:-

1. For Export item No. 1

i) Gear Box                    -         1 No

ii) Front Axle                 -         1 No.

iii)View for Oil Level    -         1 No.

iv ) Plug                          -        1 No.

v)  Distributor Valve      -         Net to net

     and handle

0.       For Export Item No. 2

i) Gear Box                    -         1 No

ii) Front Axle                 -         1 No.

iii)View for Oil Level    -         1 No.

iv ) Plug                          -        1 No.

v)  Distributor Valve      -         Net to net

     and Handle

0.       For Export Item No. 3

i) Gear Box                    -         1 No

ii) Front Axle                 -         1 No.

iii)View for Oil Level    -         1 No.

iv ) Plug                          -        1 No.

v)  Distributor Valve      -         Net to net

     and Handle

vi) Hyd. Motor               -         1 No.

vii)Control Valve           -         1 No.”

32.

861

Engineering Product

Sl.No.C1698

In the description of import item at Sl. No. 1, the following alternative import items (with quantity) shall be added:-

                  “OR

“1(a) Aluminium Ingot        -     1.10 kg/kg

                                                    content in

                                                    the export

                                                    product

1(b) Relevant alloying        -      1.10 kg/kg

        elements such as                 content in

        silicon metal,                     the export

       manganese metal,               product

       magnesium metal etc.”


-:13:-

33.

23

Engineering Product

Sl.No.C1780 (as amended vide Public Notice No.20 Dated:01.07.2002)

The norm covered by this entry shall be substituted by the following:-             

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1780

Magnet Retrieving

1 No.

1.                     Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Component in relevant dimensions

               OR

     Permanent Magnet

    Strontium Ferrite

   Grade in demagnetized

    condition as Raw

    Material

Net to net

1.02 kg/kg content of Magnet in the export product

34.

23

Engineering Product

Sl.No.C1781 (as amended vide Public Notice No.20 Dated:01.07.2002)

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1781

Magnetic Tray

1 No.

1.          Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Component in relevant dimensions

Net to net

-:14:-

     

               OR

     Permanent Magnet

    Strontium Ferrite

   Grade in demagnetized

    condition as Raw

    Material

1.02 kg/kg content of Magnet in the export product

35.

25

Engineering Product

Sl.No.C1786 (amended vide Public Notice No.20 Dated:01.07.2002)

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1786

Steel Rolls for Cold Rolling Mill (2-Hi, 4-Hi, 6-Hi)

1 kg

1.                 Alloy Tool Steel Round Bar conforming to AISI D3/D2

1.40 kg.

36.

v          of HBP (VOL-II)

PART-II

GENERAL NOTE FOR FUEL

In the “General Note for Fuel” the description of the product group against Sl. No. 9 shall be amended to read as under:-

“9. Non-ferrous basic metals (including down-stream products of aluminium)”           

37.

1

(Corrected vide Public Notice No.36 Dated:17/09/2002 )

The word “Raw” appearing in the subject heading and in the first paragraph of the said Public Notice shall be deleted.


-:15:-

Annexure “B” to the

Public Notice No. 52

Dated: 05/12/2002

CHEMICALS AND ALLIED PRODUCTS

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A3110

Para Hydroxy Benzo Phenone

1 kg

1.    Benzoyl Chloride

2.    Phenol

3.    Aluminium Chloride (Anhydrous)

4.    Dichloro Ethane (Ethylene Dichloride)

5.    Caustic Soda Flakes

6.    Methanol

1.220          kg

0.940 kg

1.682 kg

4.4 kg

2.00 kg

9.00 kg

A3111

Nipacide C1 15 (Containing Chloro Methyl Isothiozolinone content 1.4% min.)

1 kg

1.                     Chloro Methyl Isothiozolinone (10.2%)

0.138 kg

A3112

Timber Touch (1-(2,2,6-Trimethyl Cyclohexyl)-Hexan-3-o1)

1 kg

1.                                                                                        Citral (min. Purity 95%)

2.                                                                                        Methyl Propyl Ketone

1.865                        kg

1.500 kg

A3113

Ortho Cresol

1 kg

1.                 Phenol

2.                 Methanol

0.915 kg

0.312 kg

A3114

Phenyl-Alpha (2 Pyridyl) Acetone Nitrile

1 kg

1.                2 Chloro Pyridine

2.                Sodium Hydride

0.78 kg

0.18 kg

A3115

Synthetic tanning agent Ammonium Salt of Phenol, Cresol Sulfonic Acid, Polymerized with urea and formaldehyde (Active content 40.5-41%)

1 kg

1.    Phenol

2.    Cresol

0.132 kg

0.070 kg


-:16:-

A3116

Venetian Glass Beads Loose, Glass Beads in Strings, Bracelets, Rosaries, Necklaces

1 kg

1.                Glass Beads/

Metal Beads

           OR

    Block Glass /Plain

    Glass Rods/

    Millifeori Glass

    Rods/ Venetian

    Glass Rods

1.05 kg/kg  content of export

1.03 kg/kg content of export

1.20 kg/kg content of export

 
     

2.                Metal Locks

3.                Metal Findings

4.                PVC Coated Steel Wire

1.03 kg/kg content of export

1.03 kg/kg content of export

1.05 kg/kg content of export

 

A3117

Wax Crayons – Containing Paraffin wax not less than 24% and Stearic Acid not less than 74%

1 kg

1.    Paraffin Wax

2.    Stearic Acid

3.    Organic Pigments

0.252 kg

0.740 kg

0.021 kg

-:17:-

Annexure “C” to the

Public Notice No. 52

Dated: 05/12/2002

ENGINEERING PRODUCTS

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1826

LPG Storage Bullets / Tanks

1 No.

1.              B.Q. Plates

1.05 kg/kg content in export product

C1827

Kerosene Wick Stove and its parts

1 No.

1.                 CRCA Non Alloy Steel Sheet

2.                 Nickel Anode

3.                 Paper Board for corrugated boxes

1.10 kg/kg content in the export product

0.97% of the weight of components to be nickel plated

As per Packing Policy

C1828

Radiators for transformer made of stainless steel

1 No.

1.                 Stainless Steel Sheet/Coils

1.05 kg/kg content in the export product

Note : In the case of coated / painted radiator, whether internally or externally coated, relevant coating / painting material may be allowed on actual requirement basis upto to 4% of the FOB value of exports

-:18:-

C1829

Evaporative Air Cooler

1 No.

1.                 ABS

2.                 PVC Compound

3.                 Nitrile Rubber compound

4.                 Relevant Gear Motor/ Swing Motor

5.                 Relevant main Motor

6.                 Relevant Pump Motor

7.                 Adhesive

8.                 Cellulose impregnated corrugated paper cartons

1.05 kg/ kg content in the export product

1.05 kg/ kg content in the export product

1.05 kg/ kg content in the export product