GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

 

PUBLIC NOTICE NO. 89 (RE: 2006)/2004-2009

NEW DELHI: DATED: 12/03/2007

In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/ additions/deletions/corrections in the Handbook of Procedures, Vol.2, 2004-2009, as amended from time to time

 

2.       In the statement of Standard Input Output Norms (SION) as contained in the Handbook of Procedures (Vol.2), 2004-2009, as amended from time to time, amendments/corrections at appropriate places as mentioned in ANNEXURE "A” (Pages 2-4) to this Public Notice are made. 

 

3.       In the statement of Standard Input Output Norms (SION), the following additions/deletions shall be made at appropriate places as mentioned below:-

 

CHEMICALS AND ALLIED PRODUCTS

 

           The SION entry at Sl. No. A1778 deleted vide Public Notice No. 50 dated 31.08.2006 is restored with revised norms as per ANNEXURE “B” (Pages 5-6) to this Public Notice.

 

           The SION entry at Sl. No. A3598 notified thought the Public Notice No. 82 dated 16.01.2006 stands deleted.

 

 This issues in public interest.

 

 (B. S. MEENA)

DIRECTOR GENERAL OF FOREIGN TRADE

 

 

(Issued from F. No. 01/87/171/00002/AM07/DES-VIII)

 

ANNEXURE “A” to the Public Notice No. 89 (RE: 2006)/2004-2009

                                                                Dated: 12 .03.2007

 

AMENDMENTS/CORRECTIONS

 Sl.

No.

Page

No.

Reference

Amendments/Corrections

1

2

3

4

 

1.

A102

Product Group: Chemicals and

Allied Products

SION entry at Sl. No. A1170

   The Note below the SION imposing value restriction is deleted ab initio.

 

 

2.

A163

Product Group: Chemicals and

Allied Products

SION entry at Sl. No. A1875

      The description of the Export Item against the entry is corrected to read as under:

 

           “Upgraded Beneficiated Ilmenite (Synthetic Rutile) containing Titanium Dioxide 95%”

 

 

 

3.

A173

Product Group: Chemicals and

Allied Products

SION entry at Sl. No. A2005

       After the existing Import Item ‘Phenol’ at Sl. No. 1 against the entry, the following Import Item is added at Sl. No. 2 with the quantity indicated against it:

         “Ethylene Oxide --------- 0.325 kg;”

 

 

4.

B27

Product Group: Electronics Products

SION entry at Sl. No. B76

1.        The description of the Export Item ‘Glass Stems 20 mm (Electron Gun Part)’ against the entry is amended to read as under:

 

      “Glass Stems (Electronic Gun Part)”

 

2.        The description of the Import Item at Sl. No. 3, viz, ‘Nickel Soft Magnetic Alloy’ against the entry is amended to read as under:

 

     “Nickel Soft Magnetic Alloy/Stem Pin”

 

 

5.

C1

Product Group: Engineering Products SION entry at Sl. No. C2

     The SION entry is amended to read as under.

 

 

Sl. No.

Export Item

Quantity

Import Item

Qty. Allowed

1.

Aluminium Alloy extruded products including Rods and Bars

1 Kg

1.  Aluminium Alloy Billets

 OR

1(a) Aluminium Ingot/T Bars/Sows

 OR

(a)   Aluminium Scrap

(b)  Copper Scrap

(c)  Silicon

(d)  Zinc Scrap

(e)   Manganese

(f)    Any other metal X

2. Powder for Coating

 

 

 

 

3. Tool & Die Steel

1.01 kg

 

1.02 kg

 

1.04 kg

1.05 kg

1.05 kg

1.05 kg

1.05 kg

1.05 kg

0.02 kg/kg content in export product

4% of FOB Value

Note:

      1. The quantity allowed above is per kg net content of the material in the export   product.  The actual composition should be furnished by the applicant.

2        In case, the item of export is Anodised, an additional item, “Stannous sulphate” @ 1.04 kg/kg net content of the material in the export product will be allowed.

3.     Powder for coating shall be allowed only if export product is powder coated.           

 

6.

C240

Product Group: Engineering Products SION entry at Sl. No. C1701

      The description and quantity of the Export Item against the entry is amended to read as “Ferro Calcium Cored Wire (containing calcium granules & Iron Powder …. 1 Kg” instead of ‘Ferro Calcium Cored Wire (Containing mixture of 28-30% Ca Granules, 70-72% Iron Powder and Al. etc. in trace) … 1 Kg mixture content’

7.

H25

Product Group: Plastics

SION entry at Sl. No. H236

The Note below the entry incorporated through the Public Notice No. 50 (RE: 2006)/2004-2009 dated 31.08.2006 is corrected as under:

“Note: For different %age of resin content the requirement of imports for item no. 1 to 6 may be worked out on pro-rata basis.  For item No. 7 i.e. solvent, the requirement may be worked out in inverse ratio depending on solvent content/percentage”

8.

H33

Product Group: Plastics

SION entry at Sl. No. H285

1.  The description of the Export Item ‘Rail pads made out of EVA for concrete sleeper’ against the entry is amended to read as under:

           “Rail Pads made out of EVA”

 

2.        The description of the Import Items at Sl. Nos. (1) and (2) against the entry is amended to read as under:

   “1. EVA Granules

     2. Relevant Colour Master Batch/

            Carbon Black”

9.

H51-52

Product Group: Plastics

SION entry at Sl. No. H444

The description of the Import Item at Sl. No. 6, viz, ‘Relevant Polypropylene Strips Modified Poly Metallosene Strips’ against the entry is amended to read as under:

 

“LS – Strips/(Polypropylene Strips/Modified Poly Metallosene Strips/MHM Strips MWM Strips”

 

 

 

 

 

ANNEXURE “B” to the Public Notice No.  89 (RE: 2006)/2004-2009

                                                                Dated:  12.03.2007

CHEMICALS AND ALLIED PRODUCTS 

 

 Sl.

No.

Page

No.

Reference

Addition

1

2

3

4

 

1.

A153

Product Group: Chemicals and

Allied Products

SION entry at Sl. No. A1778

      The following is incoporated against the SION entry:

 

 

 

Sl. No.

Export Item

Quantity

Import Item

Qty. Allowed

1.

Compatible Black Toner for Laser Printer/Photocopier (Other than Bueno Toner and Xerox 1025)

100 Kg

1.Styrene Acrylic copolymers         other than ABS/SAN Resin

2. Linear Unsaturated Polyester Resins

   OR

Styrene Acrylic Copolymers other than ABS/SAN Resins

3. Waxes (PP Wax/Polyethylene Wax Carnauba Wax/Rice Wax/Amide Wax

4. Fumed Silica/Aerosil

5. Magnetite/Iron Oxide

6. Carbon Black

7. Additives & Charge Control Agents (Aluminium Oxide/Titanium Di-Oxides/Tin Di-oxides (Electro Cond. Inorganic oxides) Magnesium Stearate/Zinc Stearates/Iron Blue/Blue Pigments/Polishing Agent/Ceriumoxides/Strontium Titanate/Ceridust/Charge Control Agents/Dyes & Pigments/Bontrons/PVDF Powder)

8. Relevant Empty Cartridges and Bottles (For Packing)

59.8 kg

 

4.12 kg

 

 

4.12 kg

 

8.80 kg

 

 

 

1.60 kg

30.00 kg

2.96 kg

2.86 kg

 

 

 

 

 

 

 

 

 

 

 

 

 

Net Content + 1% Number