Sl.

No.

Page

No.

Reference

Amendments/Corrections

1

2

3

4

1.

3

Chemicals & Allied Products

Sl.No.A1170 (Notified vide Public Notice No. 20 Dated:01/07/2002)

After the description of import item at Sl. No. 2, the following additional import items (with quantity) shall be added:-

“3. Limestone                          -       0.137 kg

  4. Ammonia                           -       0.003 kg

  5. Corrosion Inhibitor            -       0.003 kg

  6. Chemical for Treatment     -       0.010 kg

      of Boiler Water, Process

      Water and Cooling Water

Note : CIF value of items 4, 5, & 6 together shall not exceed 5% of FOB value.

2.

169

Chemical & Allied  Product

Sl.No.A1381    

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A1381

Malic Acid

1 kg

1.     Crude Furmaric Acid (Purity 90%)

1.17 kg.

3.

5

Chemicals & Allied Products

Sl.No.A1939 (Notified vide    Public Notice No. 15 Dated:07/07/2003)

The quantity of import item at Sl. No. 1 “Alpha Pinene” shall be amended to read as under:-

“1.44 kg”

4.

329

Chemicals & Allied Products

Sl.No.A2573

After the description of import item at Sl. No. 1, the following additional import items (with quantity) shall be added:-

“2. Ethyl Cyano Acetate         -     1.26 kg/kg

  3. Sodium Cyanide               -     0.33 kg/kg

  4. Toluene                            -     0.50 kg/kg”

5.

358

Chemical & Allied  Product

Sl.No.A2813    

The norm covered by this entry shall be suspended.            

6.

16

Chemical & Allied  Product

Sl.No.A3257 (Notified vide Public Notice No.31 Dated:05.11.2003)

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A3257

Bleaching Earth

1 kg

1.     Bentonite

2.     Hydrated Lime(Purity 80-85%)

3.     Sulphuric Acid (Purity 75%)

1.05 Kg

0.506 Kg

0.976 Kg

Note : Import of Fuel may be allowed as per Policy-General note for Fuel in the Handbook

7.

479

Engineering Product

Sl.No.C3

The description of import item at Sl. No. 1, (with quantity) shall be amended to read as under:-

“1. Aluminium Scrap       -        1.03 kg

                 OR

      Aluminium Ingot       -         1.01 kg”

8.

14

Engineering Product

Sl.No.C27        (amended vide       Public Notice No.03 Dated:31.03.2003)

The description of export item shall be amended to read as under:-

“Aluminium Cast articles including parts & Components”

9.

513

Engineering Product

Sl.No.C203

The additional import item at Sl. No. 4, (with quantity) shall be added:-

“4. Plastic Components   -      Net to net

                 OR

      Relevant Plastic        -      1.05 kg/kg

      Material                            content  in

                                                export

                                                product ”

10.

15

Engineering Product

Sl.No.C220

(amended vide       Public Notice No. 44 Dated:18.10.2002)

1.      The description of  export product shall be amended to read as under:-

“Galvanised Transmission Line/Telecom Towers & Parts thereof”

2.      The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“High Tensile or Mild Steel Angles Plates/Sheets/Wide Coils”  

11.

4

Engineering Product

Sl.No.C371

(amended vide       Public Notice No. 06 Dated:08/05/2003)

The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”  

12.

 631

Engineering Product

Sl.No.C641

The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“MS HR/CR Plates/Sheets/Strips/Wide Coils of relevant type”

13.

10-11

Engineering Product

Sl.No.C667      (amended vide       Public Notice No. 06 Dated:08/05/2003)

The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”  

14.

11-12

Engineering Product

Sl.No.C668      (amended vide       Public Notice No. 06 Dated:08/05/2003)

The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”  

15.

12

Engineering Product

Sl.No.C669      (amended vide       Public Notice No. 06 Dated:08/05/2003)

The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”  

16.

13

Engineering Product

Sl.No.C670

(amended vide       Public Notice No. 06 Dated:08/05/2003)

The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“Ungalvanised Wire of relevant grade of steel with or without rust preventing coating like phosphating / greasing/ waxing etc.”  

17.

710-713

Engineering Product

Sl.No.C1062

After the import items at Sl. No. 112, the following additional inputs (with quantity) shall be added:-            

113            

24V Starter Motor

1 No.

114            

CDS Steel Tubes for Injector Pipes

3.2 Mtrs.

115            

Oil Pipe Support

1 No.

116            

Gasket

1 No.

117            

Grooved Stud

1 No.

118            

Pressure Piece

6 Nos.

119            

Element Cigar Lighter

1 No.

120            

Ring Cigar Lighter

1 No.

121            

Base Cigar Lighter

1 No.

122            

Ash Tray(F7872760)

1 No.

123            

Glove Box Lid

1 No.

124            

Handle Assist RH

1 No.

125            

Handle Assist LH

1 No.

126            

Lever with Bush & Support

1 No.

127            

Lead

17.105 Kg.

128            

GM Separators

110 Nos.

129            

Antimony

0.231 Kg.

130            

Polypropeiene

1.79 Kg.

131            

Polymethyle Methacrylite Moulding Powder – Red

0.132 Kg.

132            

Polymethyle Methacrylite Moulding Powder – Amber

0.0525 Kg.

133            

Torsion Bar

1 No.

134            

Poppet

1 No.

135            

Ball Return Guide LH

2 Nos.

136            

Roller Bearings/Shaft

2 Nos.

137            

Thrust Washer

2 Nos.

138            

Seal Nut 3/8”

1 No.

139            

Seal Nut 5/8”

1 No.

140            

Slip Seal V/Hsg

1 No.

141            

Needle Roller

2 Nos.

142            

Needle Thrust Bearing

1 No.

143            

Seal Ring

2 Nos.

144            

Seal Ring Valve

1 No.

145            

Seal Valve Hsg (Dirt Seal)

1 No.

146            

O Ring

2 Nos.

147            

O Ring Valve

2 Nos.

148            

O Ring V/Hsg Slipper Seal

1 No.

149            

O Ring R Piston

1 No.

150            

O Ring V/Hsg

1 No.

151            

Special Bolt 9/16”

6 Nos.

152            

Seal Ring S/Shaft

1 No.

153            

Seal Ring R/P

1 No.

154            

Seal Ring S/Shaft Hsg

1 No.

155            

Backup Washer

1 No.

156            

Gasket S/Cover

1 No.

157            

Retaining Ring (INT)

2 Nos.

158            

Trunion Seal

1 No.

159            

Seal S/Cover

1 No.

160            

Back Up Washer S/Shaft

1 No.

161            

Molecular Sleeve (Desiccant)

1.4 Kg.

162            

Flexible Arm

1 No.

163            

Compressor Wheel MDC

1 No.

164            

Hollow screw

2 Nos.

165            

Gasket Ring

2 Nos.

166            

Socket Head Bolt

3 Nos.

167            

Segment TS

3 Nos.

168            

Boost Pressure Pipe

1 No.

169            

Control Valve

1 No.

170            

Heat Shield

1 No.

171            

Turbine Wheel Assy

1 No.

172            

Flinger Sleeve

1 No.

173            

Steel O Ring

1 No.

174            

Segment CS

3 Nos.

175            

Bolt Hex

6 Nos.

176            

Journal

2 Nos.

177            

Snap Ring

4 Nos.

178            

Piston Ring

3 Nos.

179            

Thrust Ring

1 No.

180            

Thrust Plate

1 No.

181            

Oil Deflector

1 No.

182            

Plastic O Ring

1 No.

183            

Socket Head Bolt

4 Nos.

184            

Washer

4 Nos.

185            

Shaft Nut

1 No.

186            

Rubber Sleeves

1 No.

187            

Copper Was Mix

0.003 Kg.

188            

Styrene Butadiene Rubber 1502

0.23 Kg.

189            

Styrene Butadiene Rubber 1712

0.29 Kg.

190            

Tyre Cord Fabric 25/1680

2.52 Kg.

191            

Rubber Chemical

0.25 Kg.

192            

Polyvinyl Butyral Sheets

1.6512 Msqr.

193            

Green Float Glass

2.8198 Msqr.

18.

721

Engineering Product

Sl.No.C1077

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1077

Hose Assembly having different lengths

1 Mtr.

1.     Hydraulic Brake Hose of relevant dia and material

1.02 Meter/ Meter content of export product

19.

757

Engineering Product

Sl.No.C1294

Quantity of import item at Sl. No. 1, shall be amended to read as under:-

“1.20 kg/kg content in the export  product”

20.

 757

Engineering Product

Sl.No.C1299

1.     The description of export item shall be amended to read as under:-

“Band Saw Segments/Band Saw in Coil made from Carbon Steel/Bimetal Steel”

2.     The description of import item at Sl. No.1, (without any change in quantity) shall be amend to read as under:-

“Relevant CR Steel Strip/Wide Coil”  

21.

769 - 770

Engineering Product

Sl.No.C1356

The norm covered by this entry shall be deleted.

22.

770 - 771

Engineering Product

Sl.No.C1357

The norm covered by this entry shall be deleted.

23.

789

Engineering Product

Sl.No.C1420

The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under :-

“1. Cobalt granules/ briquettes/ Cathodes”

24.

25

Engineering Product

Sl.No.C1613     (amended vide       Public Notice No. 44 Dated:18.10.2002)

After the import item at Sl. No. 7, the following import item (with quantity) shall be added :-

“8. Grinding Wheel for     -     restricted

      edge honing and                to 3% of

      Ultra Graphite Coat          FOB value”

25.

837-838

Engineering Product

Sl.No.C1627

1.     The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under :-

“1. Copper Scrap

            OR

      Copper Cathodes”

2.        The description of import item at Sl. No. 3 (without any change in quantity) shall be amended to read as under :-

“Nickel Shots / Pellets/Ingots/Cathodes”

26.

9

Engineering Product

Sl.No.C1708     (amended vide       Public Notice No. 10   dt.30.05.2003)

After the import item at Sl. No. 7, the following additional import items (with quantity) shall be added:-

“8. Mild Steel Universal  -   1.05 kg/kg

      Column                            content

  9. Arsenic Pentaoxide -    0.7063 kg/M³

                                           of Plywood

                                           used

 10. Cabosil/ Fumed     -    Upto 2% of

       Silica                           the quantity of

                                           isopthalic

                                           Polyester

                                           Resin used

11. Foam Core Resin  -     Upto 2%  of

                                            the quantity

                                           of glass roving

                                            / chopped

                                            strand mat/

                                            surface mat/

                                           woven roving

                                           used”

27.

33

Engineering Product

Sl.No.C1898      (notified vide         Public Notice No. 15 Dated:07/07/2003)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1898

Forged Safty relief Valve for LPG Cylinder made of brass

1 No.

1. Brass Rod Round

1.23kg/kg content in the export

Product

28.

2

Engineering Product

Sl.Nos. (Amended vide Public Notice No. 35 Dated:05.12.2003)

The following Standard Input Output Norms entries at  Sl. Nos. corrected to read as under:-

“C-1932 to C-1934 instead of C-1930 to 1932”

29.

1092

Textile  Products

Sl. No. J-137     

The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“PU/PVC coated Nylon/Polyester Fabric

                        OR

  Any other relevant fabric”

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A3301

Sulpho Chlorinated Paraffin (Chlorine content : 26%, sulfur content: 2.27%)”

1 kg

1. Paraffin Wax

0.720 kg.

A3302

Lanolin Anhydrous (Colour: Palo Yellow to Yellow) Acid value : Less than two

1 kg

1.     Wool Grease Colour: Light  brown to brown Acid Value : 3 to 9

2.     Isopropyl Alcohol

1.410 Kg

0.118 Kg

A3303

Ethylene Glycol Mono Ethyl

Ether

1 kg

1.       Denatured Ethyl Alcohol

2.       Triethyl Amine Catalyst

1.154 Kg

0.004 Kg

A3304

Diuron Technical

1 kg

1.     Ortho Dichloro Benzene

2.     3,4 Dichloro Aniline

0.300 Kg.

0.802 Kg.

A3305

Octyl Hydroxy Stearate

1 kg

1.     2-Hydroxy Stearic Acid

2.     Ethyl hexanol

0.838 kg.

0.363 kg.

Sl.No