GOVERNMENT OF INDIA
PUBLIC NOTICE NO.38 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 09/01/2004.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of ForeignTrade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl. No.A-3272, new entries at Sl. No. A-3273 to A-3289 shall be added as per Annexure ”B” to this Public Notice.
-:2:-
After the existing entry at Sl.No.C-1934, new entry at Sl.No.C-1935 shall be added as per Annexure “C” to this Public Notice.
After the existing entry at Sl.No.H-536 , new entries at Sl.No.H-537 to H-543 shall be added as per Annexure “D” to this Public Notice.
After the existing entry at Sl.No.J-355 , new entries at Sl.No.J-356 to J-357 shall be added as per Annexure “E” to this Public Notice.
5. This issues in public interest.
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 38
Dated: 09/01/2004
| Sl. No. |
Page No. |
Reference |
Amendments/Corrections |
| 1 |
2 |
3 |
4 |
| 1. |
50 |
Chemicals & Allied Products Sl.No.A254 |
After the import item at Sl. No. 2, the following import items (with quantity) shall be added:- “3. Furnace Oil - 0.735 Lit/kg 4. L.D.O. - 0.210 Lit/kg” |
| 2. |
153 |
Engineering ProductSl.No.A1168 |
The norm covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| A1168 |
Silicon Carbide Grains |
1 MT |
1. Silicon Carbide Crude/ Lumps (containing not less than 95% on dry basis) |
1.15 MT |
| Note : The Purity of export product shall not be lesser than the purity of import item. |
||||
| 3. |
230 |
Chemicals & Allied Products Sl.No.A1790 |
After the import item at Sl. No. 9, the following import items (with quantity) shall be added:- “10.LDO/SKO - 0.435 kg” |
-:4:-
| 4. |
236 |
Chemicals & Allied Products Sl.No.A1837 |
After the import item at Sl. No. 8, the following import items (with quantity) shall be added:- “9.LDO/SKO - 0.216 kg” |
| 5. |
284 |
Chemicals & Allied Products Sl.No.A2217 |
The quantity of import item at Sl. No. 1, shall be amended to read as under:- “0.717 kg” |
| 6. |
5 |
Engineering ProductSl.No.A2312 (amended vide Public Notice No.31 Dated:05.11.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| A2312 |
Zirconium Octoate 18% (Zirconium content 18%) |
1 kg |
1. 2-Ethyl Hexanoic Acid/ Dimethyl Hexanoic Acid Octoic Acid |
0.396 kg. |
| 7. |
357 |
Chemicals & Allied Products Sl.No.A2821 |
After the import item at Sl. No. 3, the following import items (with quantity) shall be added:- “4.LDO/SKO - 0.369 kg” |
| 8. |
365 |
Chemicals & Allied Products Sl.No.A2890 |
After the import item at Sl. No. 7, the following import item (with quantity) shall be added:- “8. Furnace Oil - 1.04 Lit/kg” |
| 9. |
366 - 367 |
Chemicals & Allied Products Sl.No.A2901 |
The description of export item shall be amended to read as under:- “Allura Red (Food Red 17) (C.I. No. 16035” |
-:5:-
| 10. |
368 |
Chemicals & Allied Products Sl.No.A2913 |
After the import item at Sl. No. 1, the following import item (with quantity) shall added:- “2. Furnace Oil - 1.29 Lit/kg” |
| 11. |
12 |
Chemicals & Allied Products Sl.No.A3028 (Amended vide Public Notice No. 37 Dated:03/10/2002) |
Quantity of import item at Sl. No.7, shall be amended to read as under:- “1.16 kg” |
| 12. |
14 |
Chemicals & Allied Products Sl.No.A3122 ((Amended vide Public Notice No. 54 Dated:03/01/2003) |
The description of import item at Sl. No. 1 &2, (with quantity) shall be amended to read as under:- “1. Para Chloro Benzotrichloride - 2.25 kg 2. Phenol - 1.00 kg” |
| 13. |
35 |
Chemicals & Allied Products Sl.No.A3164 (amended Vide Public Notice No.03 Dated:31/03/2003) |
The description of export item shall be corrected to read as under:- “2,6 Dichloro Diphenylamine” |
| 14. |
14 |
Chemicals & Allied Products Sl.No.A3175 (Notified vide Public Notice No. 10 dated: 30/05/2003) |
1. The quantity of import item at Sl. No. 6, shall be amended to read as under:- “0.031 kg /kg of the export product instead of 0.30 kg” 2. The quantity of import item at Sl. No. 16 shall be amended to read as under:- “0.033 kg/kg of export product instead of 0.020 kg” |
-:6:-
| 3. After import items at Sl. No. 16 the following additional inputs (with quantity) shall be added:- “17. Refined Linseed Oil - 0.088 kg/kg of export product 18. Oxy Aluminium - 0.005 kg/kg Octoate of export product |
| 15. |
23 |
Chemicals & Allied Products Sl.No.A3188 (amended Vide Public Notice No.15 Dated:07/07/2003) |
1. The description of export item shall be amended to read as under:- “Bisphenol Amino Ester (Propane 2,2-Diphenyl-4, 4’Bis (2-Amino Phenyl-1-Sulfonyloxy)” 2. The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:- “Bisphenol A” |
| 16. |
656 |
Engineering ProductSl.No.C820 |
The norm covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| C820 |
S.S. Fabricated/ Welded Pipes/ Tubes |
1 MT |
1. Stainless Steel Plates/ Sheet/ Strips/ Wide Coils of relevant grade & specification |
1.10 MT. |
| 17. |
657-658 |
Engineering ProductSl.No.C832 |
The description of export item shall be amended to read as under:- “Table, Kitchen & other household article of round shape made of Stainless Steel with or without handle irrespective of what material the handle may have been made of” |
-:7:-
| 18. |
658 |
Engineering ProductSl.No.C833 |
The description of export item shall be amended to read as under:- “Table, Kitchen & other household article made of Stainless Steel with or without handle irrespective of what material the handle may have been made of (other than those covered under C-832)” |
| 19. |
8 |
Engineering ProductSl.No.C873 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The quantity of export item shall be corrected to read in “Nos.” |
| 20. |
707 - 710 |
Engineering ProductSl.No.C1059 |
The description of export item shall be amended to read as under:- “Light Commercial Vehicle (LCV) of GVW upto 7.5 MT” |
| 21. |
710-713 |
Engineering ProductSl.No.C1062 |
The description of export item shall be amended to read as under:- “Medium Commercial Vehicles GVW above 7.5 MT and upto 12 MT in CBU/SKD/CKD condition” |
| 22. |
777 |
Engineering ProductSl.No.C1375 |
The norm covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| C1375 |
Machined cast Bushings of Automotive and Non-Automotive applications, Pumps and valve |
1 kg |
1. Gun Metal / Red Brass / Leaded Bronze Ingot / Copper Cathode with alloying elements Tin, Lead and Zinc |
1.20 kg/kg content in the export product |
-:8:-
| Components like casing, impellers, Discs, Plugs Yoke Sleeves, Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of gun metal or Lead Bronze or Red Brass OR with copper and allowing elements Tin, Lead and Zinc varying from 1 to 10% each, Conforming to BS 1400-LB2, LG2, LG4/DIN 1705-RG5, RG7/ ASTMB 584 or ASTMB 763-C84400, C03200/C93700/SAE660 |
| 23. |
872-873 |
Engineering ProductSl.No.C1745 |
The norm covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
C1745 |
Hermetically sealed compressors for air conditioner using R 22 refrigerant gas of different capacities |
1 No. |
1. Components 2. (a) CRNGO Steel Sheet upto 3500 Kcal/hr (b) More than 3500 Kcal/hr |
Net to net basis except upper and lower housing 0.0032 Kg/ Kcal 0.0024 kg/ Kcal |
-:9:-
| |
3. (a) Copper Wire upto 3500 Kcal/hr (b) Mote than 3500 Kcal/hr 4. (a) Music Wire Upto 3500 Kcal/hr (b) More than 3500 Kcal/hr 5. (a) Refrigeration Oil Upto 3500 Kcal/ hr (b) More than 3500 Kcal/hr 6. HR non alloy steel sheet/ coils 7.EC grade aluminium ingot |
0.0005 kg/k/cal 0.0004 kg/Kcal 0.000016 kg/ Kcal 0.000011 kg/ Kcal 0.0003 Ltrs/ Kcal 0.0002 Ltrs/ Kcal 1.28 KG/KG content 1.08 Kg/Kg content |
| 24. |
873 |
Engineering ProductSl.No.C1746 |
The norm covered by this entry shall be deleted. |
| 25. |
873 - 874 |
Engineering ProductSl.No.C1747 |
The norm covered by this entry shall be deleted. |
| 26. |
874 |
Engineering ProductSl.No.C1748 |
The norm covered by this entry shall be deleted. |
-:10:-
| 27. |
33 |
Engineering ProductSl.No.C1899 (Notified vide Public Notice No. 15 Dated:07/07/2003) |
After import item at Sl. No.5, the following import item (with quantity) shall be added:- “6. Relevant Stainless - 1.08 kg/kg Steel Sheets content in the export product” |
| 28. |
21-23 |
Engineering ProductSl.No.C1909 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 29. |
24-26 |
Engineering ProductSl.No.C1910 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 30. |
26-28 |
Engineering ProductSl.No.C1911 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 31. |
29-31 |
Engineering ProductSl.No.C1912 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
-:11:-
| 32. |
31-33 |
Engineering ProductSl.No.C1913 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 33. |
34-35 |
Engineering ProductSl.No.C1914 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 34. |
36-37 |
Engineering ProductSl.No.C1915 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 35. |
38-39 |
Engineering ProductSl.No.C1916 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 36. |
40-41 |
Engineering ProductSl.No.C1917 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:- “Ammonium Polyacrylate” |
| 37. |
42-43 |
Engineering ProductSl.No.C1918 (Notified vide Public Notice No. 23 Dated:10/09/2003) |
The description of import item at S. No. 1 (J) (without any change in quantity) shall be corrected to read as under:- “Ammonium Polyacrylate” |
-:12:-
| 38. |
19 |
Engineering ProductSl.No.C1929 (Notified vide Public Notice No. 31 Dated:05/11/2003) |
The quantity of export item shall be amended to read in “Nos. instead of Kgs. |
| 39. |
963 |
Plastic ProductsSl.No.H-15 |
The Foot Note below this entry shall be deleted. |
| 40. |
964 |
Plastic Products Sl. No. H-24 |
The norms covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| H-24 |
Articles made of HDPE/ PP twine / Rope OR Articles made of blend of HDPE&PP Twine / Ropes |
1 kg |
1. Relevant HDPE/PP Granules/ Chips |
1.08 kg/kg content in the export product |
| Note : 1. The relevant HDPE & PP Granules may be allowed as 1.08 kg./kg content in the export product both for exclusive Articles made of HDPE/PP Twine /Ropes and for Articles made of blended HDPE & PP Twine / Rope on the actual net content of that relevant polymer i.e. HDPE or PP in the blended export product. Note : 2. In case of coloured export items, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.06 kg/kg content in the export product. |
||||
-:13:-
| 41. |
9 |
Plastic Products Sl. No. H-333 (corrected vide Public Notice No. 61 Dated:03/02/2003) |
The norms covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| Twine/ Rope made of HDPE/ PP OR Twine/ Rope made of a blend of HDPE & PP in varying proportions |
1 kg |
1. Relevant HDPE/PP Granules/ Chips |
1.07 kg/ Kg content in the export product |
|
| Note: 1. The relevant HDPE &PP Granules may be allowed as 1.07 kg/kg content in the export product both for exclusive HDPE/PP Twine/ Ropes and for Twine/ Rope made of blend of HDPE & PP on the actual net content of the relevant polymer i.e. HDPE of PP in the blended Twine/ Ropes to be exported. 2.In case of export of coloured Twine/Ropes, the relevant colour Master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.05 kg/ kg content in the export product. |
||||
| 42. |
1025 |
Plastic Products Sl. No. H-349 |
The norms covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| H349 |
Tape / Yarn (plain Twisted) made of HDPE/PP OR Tape / |
1 kg |
1. Relevant HDPE/PP Granules/ Chips |
1.05 kg/kg content in the export product |
-:14:-
| Yarn (Plain / Twisted) made of blend of HDPE & PP in varying proportions |
||||
| Note : 1. The relevant HDPE & PP Granules/Chips may be allowed as 1.05 kg./kg content in the export product both for the exclusive HDPE/PP and Tape /Yarn made of blended HDPE & PP on the actual net content of that relevant polymer i.e. HDPE or PP in the blended Tape /Yarn to be exported. Note : 2. In case of export of coloured Tape / Yarn, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the relevant polymer i.e. HDPE/PP shall be reduced to 1.03 kg/kg content in the export product. |
||||
| 43. |
1041 - 1042 |
Plastic Products Sl. No. H-444 |
The norms covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| H444 |
Aseptic Packaging of Aluminium Foil of thickness less than 0.2 mm backed by Paper & LDPE with/ without Polypropylene / MPM Strips |
1 MT |
1. Relevant Duplex paper Board / Bleached paper/ Kraft Paper 2. Aluminium Foil 3. LDPE Granules 4. LLDPE/HDPE/MLLDPE Granules |
1.10 MT/MT content in the export product 1.10 MT/MT content in the export product 1.10 MT/MT content in the export product 1.12 MT/MT content in the export product |
-:15:-
| 5. Etheylene Acrylic Acid Copolymer/ Adhesive Copolymer Granules 6. Relevant Polypropylene Strips Modified Poly Metallosene Strips 7. Printing Ink 8. Photo Polymer Plates |
1.12 MT/MT content in the export product Net to net 12 kgs./MT of export product 0.5 No./MT of export product |
| 44. |
10 |
Plastic Products Sl. No. H-461(amended vide Public Notice No. 61 Dated:03/02/2003) |
The norms covered by this entry shall be substituted by the following:- |
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
| H-461 |
Prepared adhesives based on Plastic (Two component Laminating Adhesives) Adhesive (Polyurethane solution containing 60% Resin content and 40% Solvent) |
1 kg |
1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (Relevant) |
0.090 kg 0.258 kg 0.050 kg 0.195 kg 0.015 kg 0.035 kg 0.400 kg |
-:16:-
| 45. |
5-6 (vol-2 Part-I) & (v)–(vi) (Vol-2 Part-II) |
GENERAL NOTE FOR FUEL (Amended vide Public Notice No.27 Dated:06.10.2003) |
After Sl. No. 18 of the General Note for Fuel, the following shall be added:- “19. Bras Art Wares - 2% |
-:17:-
Annexure “B” to the
Public Notice No. 38
Dated: 09/01/2004
| Sl.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
||
| A3273 |
Ramipril |
1 kg |
1. L-Serine OR L-Serine Methyl Ester Hcl 2. Cyclopentanone 3. Pyrolidine 4. ECPP-Alanine 5. 5% Palledium on Carbon 6. Di Cyclo Carbodiamide OR Propyl Phosphoric Anhydride N-Butyl Acetate 50% Sol 7. 1-Hydroxy Benzotriazole 8. Cyclohexane/Dimethyl Formamide 9. Methanol/Di Isopropyl Ether 10.Chloroform |
5.74 Kg 8.00 Kg 5.54 Kg 5.00 Kg 1.23 kg 0.200 Kg 1.05 Kg 2.10 Kg 0.72 Kg 8.50 Kg 11.50 kg 15.00 Kg |
||
| A3274 |
Anisyl Cyanide[(4-Mithoxyphenyl) Acetonitrile]/4-Methoxy Benzyl Cyanide |
1 kg |
1. p-Anisaldehyde 2. Toluene 3. Sodium Cyanide |
1.13 Kg 0.15 Kg 0.41 Kg |
||
-:18:-
| A3275 |
Indoxacarb 14.5% SC |
1 kg |
1. Indoxacarb (on the basis of a.i. 71.25%) 2. Soprophor BSU 3. Soprophor 3D33 4. Methyl Soyate |
0.210 Kg 0.060 kg 0.090 Kg 0.598 Kg |
||||
| A3276 |
Lannate (Methomyl 40% SP) |
1 kg |
1. Methomyl Tech. (a.i-98%) 2. HI SIL (SiO2) 3. Sucrose Octaacetate 4. Sun Spray Oil 5. Brilliant blue dye |
0.4120 Kg 0.0600 Kg 0.0040 Kg 0.0065 Kg 0.0020 Kg |
||||
| A3277 |
Hepta Sodium Salt of Diethylene Triamine Pentamethylene Phosphonic Acid (Active Salt Content = 32%) |
1 kg |
1. Yellow Phosphorous 2. Diethylene Triamine |
0.083 Kg 0.053 Kg |
||||
| A3278 |
Mono Chloro Benzene |
1 kg |
1. Benzene |
0.715 Kg |
||||
| A3279 |
Het Diol (1,4,5,6,7, 7 Hexa Chloro-2-3 Bis (Hydroxy Methyl) Bicyclo-2(2,1,1)-heptane-5) |
1 kg |
1. Hexa Chloro Cyclo Pentadiene 2. Butene Diol 3. Epichlorohydrin 4. Toluene |
0.850 kg 0.270 kg 0.018 kg 0.088 kg |
||||
| A3280 |
Oryazalin technical 98% Min. |
1 kg |
1. Potassium-4-Chloro 3.5 Dinitro benzene Sulphonate 2. Di-N-Propyl Amine 3. Thionyl Chloride 4. Toluene 5. Ethylene Dichloride 6. Dimethyl Formamide |
1.340 kg 0.490 kg 0.720 kg 0.680 kg 2.290 kg 0.116 kg |
||||
-:19:-
| A3281 |
Magnesium Aluminate Spinel (MAS-78) (containing alumina 77 + 1% and magnesium Oxide 22-23%) |
1 kg |
1. Magnesium calcined 2. Alumina Calcined 3. Dextrin 4. Cemgrind (mixture of high boiling alkanolamine) |
0.259 kg 0.886 kg 0.019 kg 0.105 gm |
| A3282 |
Biocide Navdecide AL5014 (containing Gluteraldehyde 50%=9.41%) |
1 kg |
1. Gluteraldehyde 50% |
0.095 kg |
| A3283 |
Hydroxylamine Hydrochloride |
1 kg |
1. Methyl Ethyl Ketoxime 2. Furnace Oil |
1.46 kgm 1.10 Lit |
| A3284 |
Reactive Blue 221 (Reactive Blue BRX) |
1 kg |
1. Cyanuric Chloride 2. N-Ethyl Meta Base Ester |
0.187 kg 0.310 kg |
| A3285 |
U.V. Curable Printing Ink – Black, Flush Route (Minimum Pigment 16.7 % + /- 1%) |
1 kg |
1. U.V. Flush Colour – Black (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate 3. Reactive Monomer namely, Tri-Propylene, Glycol Diacrylate/ Tri Methylol propane Tri |
0.576 kg 0.196 kg 0.073 kg |
-:20:-
| Acrylate/ Ethoxylated, Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica /Additive |
0.124 kg 0.011 kg 0.051 kg |
|||
| A3286 |
U.V. Curable Printing Ink – various colours, Flush Route (Minimum Pigment 15 % + /- 1%) other than Black , Cyan, Magenta and Yellow |
1 kg |
1. U.V. Flush Colour – Magenta (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate 2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate 3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/ Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/Di-Pentaerythritrol Hexa Acrylate 4. Photo Initiator Combo 5. P.E.Wax 6. Fumed Silica/ Additive |
0.515 kg 0.247 kg 0.103 kg 0.103 kg 0.011 kg 0.051 kg |
