eximtimes.com
www.eximtimes.com

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO.  23 (RE- 03)/ 2002-2007

NEW DELHI : DATED : 10/09/2003.

                Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and  Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2.             In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3.             In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4.             In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

                After the existing entry at Sl.No.A-3230,  new entries at Sl. No.  A-3231 to A-3239  shall be added as per Annexure  ”B”  to this Public Notice.

-:2:-

ENGINEERING PRODUCTS

                After the existing entry at Sl.No.C-1906, new entries at Sl.No.C-1907  to C-1923 shall be added as per Annexure  ”C”  to this Public Notice.

PLASTICS PRODUCTS

                After the existing entry at Sl. No. H-531, new    entries   at Sl.  Nos. H-532 to H-535  shall be added as per Annexure  ”D”  to this Public Notice.

TEXTILE PRODUCTS

                After the existing entry at Sl.No.J-354, new entry at Sl.No.J-355   shall be added as per Annexure  ”E”  to this Public Notice.

5.                    This issues in public interest.

 (L. MANSINGH)

  DIRECTOR GENERAL OF FOREIGN TRADE


-:3:-

Annexure “A” to the

Public Notice No. 23

 Dated: 10/09/2003

AMENDMENTS/CORRECTIONS

Sl.

No.

Page

No.

Reference

Amendments/Corrections

1

2

3

4

1.

99

Chemicals & Allied Products

Sl.No.A661

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A661

Fast Red B Base

1 kg

1.        Ortho Anisidine

2.        Acetic Anhydride

1.0 kg

0.88 kg

2.

5

Chemicals & Allied Products

Sl.No.A1659 (Amended vide Public Notice No.03 Dated:31/03/2003)

The norm covered by this entry shall be substituted by the following:-            

Sl. No.

Export Item

Qty.

Import Item

Qty. Allowed

A1659

Trizophos Technical (70%)

1 kg

1.        Phenyl Hydrazine Free Base

              OR

     Phenyl Hydrazine

    Sulphate

2.        O.O. Diethyl Thiophosphoric Chloride

3.        Formic Acid

4.        Orthoxylene

               OR

     Solvent Naphtha

0.370 kg

0.540 kg

0.510 kg

0.200 kg

0.500 kg

0.450 kg

-:4:-

3.

301

Chemicals & Allied Products

Sl.No.A2337

After the description of import item at Sl. No. 1, the following import item (with quantity) shall be added:-

                    “OR

1. Gypsum (Calcium           -     1.24 kg”

    Sulfate Dihydrate)            

4.

342

Chemicals & Allied Products

Sl.No.A2704

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2704

Printing Ink Vehicle Gel (Solid content 59+/-2%)

1 kg

1.        Soya Long Oil Alkyd Resin of 70% Long Oil Length having Solid content 100%

2.        Soyabean Oil

3.        Texanol Isobutyrate

4.        Petroleum Distillate (Distillation Range 240-330 Degree Celsius

5.        Phenol Modified Rosin Ester

6.        Antioxidant namely BHT and MEHQ

0.105 kg

0.020 kgs

0.052 kgs

0.360 kgs

0.460 kgs

0.010 kgs

-:5:-

5.

366

Chemicals & Allied Products

Sl.No.A2897

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2897

Calcium Dodecyl Phenate Detergent (Lubricating Oil Additive) Containing Calcium Dodecyl Phenate 40% Min.

1 kg

1.        Dodecyl Phenol

2.        Isodecyl Alcohol

3.        C20-C24 Linear Alkyl Benzene Sulfonic Acid

4.        Slaked Aid

5.        Filter Aid

6.        Monoethelene Glycol (MEG)

7.        Base Oil

0.367 kg

0.010 kg

0.023 kg

0.141 kg

0.015 kg/kg

0.0724 kg/kg

0.387 kg/kg

6.

11

Chemicals & Allied Products

Sl.No.A2980 (amended vide Public Notice No. 10 Dated:01.05.2002)

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2980

Manganese Oxide (MnO)

1 MT

1.          Manganese Ore

2.          Metallurgical Coke

1.25 MT

0.25 MT

7.

17

Chemicals & Allied Products

Sl.No.A2995 (Amended Vide Public Notice No. 20 Dated: 01/07/2002)

1.        The description of export item shall be amended to read as under:-

“Anticorrosion VCI Wrapping Paper having coating of 15+/-1% grams of VCI content per Sq.mtr.”

2.        The description of import item at Sl. No. 2, (with quantity) shall be amended to read as under:-

     “VCI Solutions of different    -    0.03 kg

      grades (having Solid content

      of 50 +/-1%)”

-:6:-

8.

24     -     25

Chemicals & Allied Products

Sl.No.A-3198, A-3199, A-3200 and 3201 (amended vide Public Notice No. 15 Dated:07/07/2003)

These norms at Sl. Nos. A-3198, A-3199, A-3200 and 3201 shall be deleted from Chemical & Allied products Group and Shifted to Plastics Products Group.

9.

494-495

Engineering Product

Sl.No.C134

The norm covered by this entry shall be deleted.

10.

495-496

Engineering Product

Sl.No.C136

The norm covered by this entry shall be deleted.

11.

499

Engineering Product

Sl.No.C149

The norm covered by this entry shall be deleted.

12.

530

Engineering Product

Sl.No.C267

The description of import item at Sl. No. 2, (with quantity) shall be amended to read as under:-      

“PVC Compound        -        74.80 kgs

            OR

  (a) PVC Resin           -         44.880 kgs

  (b) DOP                     -         22.440 kgs

  (c) Fillers                   -         7.480 kgs”     

13.

557

Engineering Product

Sl.No.C374

The Foot Note below this entry shall be added:-

“Note: Incase the above nuts are surface coated with Bonded Solid Film Lubricant EVERLUBE 6102-G or equivalent, the same may  also be allowed to the extent of 0.006 Lit/kg of the export product”.

-:7:-

14.

569

Engineering Product

Sl.No.C419

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C419

Jigsaw Blades/ Sabresaw Blades/ Body Saw Blades

1 kg

1.        Relevant High Speed Steel Strips/ Bimetal Strips

1.57 kg

15.

631

Engineering Product

Sl.No.C639

The description of export item shall be amended to read as under:-

“Round / Elliptical / Oval Tin Plate Container and/or Components thereof”

16.

636

Engineering Product

Sl.No.C682

The norm covered by this entry shall be deleted.

17.

653

Engineering Product

Sl.No.C804

The norm covered by this entry shall be deleted.

18.

654

Engineering Product

Sl.No.C813

The description of import item at Sl.No. 1, (without any change in quantity) shall be amended to read as under:-

“Non Alloy HR/CR Steel Sheets/ Strips/ Wide Coils

                      OR

Stainless Steel Sheets/ Strips/ Wide Coils”

-:8:-

19.

664

Engineering Product

Sl.No.C873

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C873

Single/ Twin Type Shaving System, Disposable Razor Blades (single/ double / triple blades) with / without Lubra exported either with fixed handle or handle and magazine separately in different types of packings

1 kg

1.        Cold Rolled Stainless Steel Strips

2.        ABS (for handle, seat, top cap and spacer 1 & 2)

3.        High impact / GP Polystyrene (for Protective Cap/ Magazine)

 


4.        Polyox Coagulant

5.        Polyox VSRS 750

6.        GP Polystrene

 


7.        Polyterafluoro-ethylene

8.        Grinding Wheel

9.        Slitting Sheel

10.     Krytox

 


11.     Aluminium Strips/ Coil/ Sheet (for spacer / clamps)

1.75 kgs/kg content in export product

1.10 kgs/kg content in export product

1.10 kgs/kg content in export product

|All the three |items |together 1.30 |kg/kg weight |of the Lubra |strips in the |export |product

|Consumables|CIF value |taken |together may |be restricted |to 1% of the |FOB value

1.06 kg/kg content of the export product

-:9:-

     

12.     T P Elastomer for Sleeve

13.     High impact Polystyrene (for Top Cap seat & handle)

14.     Brass Strips / Zinc Mazak (for razor head and razor handle rib)

15.     Packing material

1.10 kg/kg content in the export product

1.10 kg/kg content in the export product

1.02 kg/kg content in the export product

As per packing policy

Note : Wherever handles are sought for import separately, the same be allowed as components on net to net basis with accountability clause and in such cases the rest of the raw materials will have to be accounted for as per the norms above.

20.

664

Engineering Product

Sl.No.C874

The norm covered by this entry shall be deleted.

21.

664 - 665

Engineering Product

Sl.No.C875

The norm covered by this entry shall be deleted.

22.

665

Engineering Product

Sl.No.C876

The norm covered by this entry shall be deleted.

23.

665

Engineering Product

Sl.No.C877

The norm covered by this entry shall be deleted.

-:10:-

24.

665 - 666

Engineering Product

Sl.No.C878

The norm covered by this entry shall be deleted.

25.

 666

Engineering Product

Sl.No.C879

The norm covered by this entry shall be deleted.

26.

670

Engineering Product

Sl.No.C915

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C915

Cold Rolled Non Alloy/ Alloy Steel Hardened and Tempered Saw Blades/ Handsaw Blades

1 MT

1.        Hot Rolled Alloy/ Non Alloy Steel Strips / Wide Coils of relevant grade

1.20 MT

27.

826

Engineering Product

Sl.No.C1553

The description of import item at Sl. No. 3, (without any change in quantity) shall be amended to read as under:-       

“Non Woven Separators”     

28.

831

Engineering Product

Sl.No.C1588

The description of import item at Sl. No. 1, (with quantity) shall be substituted with the following:-

“Nickle Hydroxide Powder   -   8.63 gms/AH

 (45-65% Nickel + Cobalt)

                OR

 Nickle Anode                       -   6.79 gms/AH

               OR

 Hydrated Nickle Sulphate    -  27.18 gms/AH

 (containing 20-23% Nickel)”

29.

840

Engineering Product

Sl.No.C1638

After the import item at Sl. No. 1, the following additional import item  (with quantity) shall be added:-

“2. Aluminium Scrap         -         1.20 kg”

-:11:-

30.

 858

Engineering Product

Sl.No.C1688

The norm covered by this entry shall be deleted.

31.

 28

Engineering Product

Sl.No.C1887 (Notified vide Public Notice No.10 Dated:30.05.2003)

The description of export item shall be amended to read as under:-

“Single / Double Wall Copper coated Steel Tubes”

32.

28

Engineering Product

Sl.No.C1891      (Notified vide Public Notice No.15 Dated:07/07/2003)

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1891

Radiator made of Aluminium with Plastic Tank

1 No.

1.        Aluminium Tube

2.        Aluminium Foil

3.        Aluminium Sheets/ Strips

4.        Brazing Flux

5.        Relevant Plastic Tanks

             OR

     Relevant Plastic

     Granule

1.02 kg/kg content in the export product

1.02 kg/kg content in the export product

1.03 kg/kg content in the export product

Up to 5% of FOB value

Net to net

1.05 kg./kg content in tank

-:12:-

33.

12

Food Products

Sl.No.E-42   (Amended vide Public Notice No. 46 Dated:06.11.2002)

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

E-42

Soyabean Extraction (Soyabean De-oiled cake or meal)

1 MT

1.        Hexane

2.        Coal

3.        Diesel (for power generation)

                 OR

      Kerosene (for Power                

     Generation)

9.20 Ltrs.

110 kg

11 Ltrs

11 Ltrs

Note:1. Item No. 3 i.e. Diesel or Kerosene shall be allowed only under A.U.    Condition.

Note:2  The norms  for Diesel/ Kerosene are applicable only to those units which have facility for captive power generation using Diesel / Kerosene as fuel.

Note:3 Item No.2, i.e. Coal is allowed as a process material essentially for heating purpose in the manufacture of Soyabean extraction and not for power generation for running the plant

34.

915

Food  Product

Sl.No.E-93      

The description of export item shall be amended to read as under:-

“Natural Sesame Seeds/ Sun Hemp Seeds/ Safflower Seeds/ Sesbenia Seeds”            

35.

938

Leather Product

Sl.No.G-18      

The description of export item shall be amended to read as under:-

“Leather – Cum-Synthetic Golf Gloves / Synthetic Golf Gloves with Leather”            

-:13:-

36.

981

Plastics Products

Sl.No. H-119

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-119

High Impact Polystyrene Resin

1 kg

1.        Styrene Monomer 99%

2.        Polybutadiene Rubber

3.        Plasticizer

4.        Mineral Oil (Liquid Paraffin)

                OR

1.        Styrene Monomer

2.        Polybutadiene Rubber

3.        Mineral Oil (Liquid Paraffin)

0.9715 kg

0.0632 kg

0.0116 kg

0.0103 kg

0.9470 kg

0.0875 kg

0.0221 kg

37.

1059

Sports Goods

Sl.No.I-26      

The description of export item shall be amended to read as under:-

“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-5”            

38.

1059

Sports Goods

Sl.No.I-27      

The description of export item shall be amended to read as under:-

“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-4”            

-:14:-

39.

1059

Sports Goods

Sl.No.I-28      

The description of export item shall be amended to read as under:-

“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-3”            

40.

31

Sports Goods

Sl.No.I-39        (Amended vide Public Notice No.46 Dated:06.11.2002)      

The description of export item shall be amended to read as under:-

“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-XS (Extra Small)”            

41.

31- 32

Sports Goods

Sl.No.I-40        (Amended vide Public Notice No.46 Dated:06.11.2002)      

The description of export item shall be amended to read as under:-

“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-1”            

42.

 32

Sports Goods

Sl.No.I-41        (Amended vide Public Notice No.46 Dated:06.11.2002)      

The description of export item shall be amended to read as under:-

“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-2”             

-:15:-

43.

11

Textile Products

Sl.No.J-96     (Notified vide Public Notice No. 10 Dated:30/05/2003)

The description of import item at Sl. No. 1, (with quantity) shall be substituted by the following:-

“1. Raw Cotton          -       1.24 kg/kg

                                            content in the

                                            export product

           OR

     Cotton Yarn         -         1.04 kg/kg

                                             content in the

                                             export product
   

 

                   AND/OR

    Cotton Blended          -       1.05 kg/kg

    Yarn with Manmade           content in the

    Yarn (excluding                  export product

    Spandex/ Lycra Yarn)

    Like Polyester / Viscose/

    Acrylic / Nylon / Silk/

    Tencel (Lyocell Fiber)

               AND/OR

   Manmade Yarn (Excluding  -   1.10 kg/kg

   Spandex/ Lycra Yarn) Like       content in

   Acrylic / Polyester / Nylon/       in the

   Tencel (Lyocell Fibre)               export

                                                      Product”

44.

1126

Miscellaneous Products

Sl.No.K-46

The description of import item at Sl. No. 1, (with quantity) shall be amended to read as under:-  

“1. Glass Rods                    -      0.50 kg

           OR

     Unfinished Glass          -      0.20 kg

     Chatons”

-:16:-

45.

1129

Miscellaneous Products

Sl.No.K-58

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

K-58

Playing Cards Plastic Coated

1 kg

1.        Card Board / Art Card Coated Other than Ivory Board (GSM 135 – 300) only relevant item to

1.20 kg/kg content in the export product
     

be used in the export shall be allowed for import

2.        (a) Ketonic Resin

2.  (b) Silicon Fluid

             OR

2.  Water  Based

     Coatings

3.        Printing Ink

4.        Graphic Art Film/ P.S. Offset Plates / Offset Rubber Blankets / Stamping Foil

Up to 6% by weight of card board

Up to 2% by weight of card board

Up to 8% by weight of card board

Up to 2 % by weight of card board

Up to 3% of the FOB value

46.

1133

Miscellaneous Products

Sl.No.K-86

1.        The description of export item shall be amended to read as under:- 

“Mineral Water in PET/ PVC Bottles Packed in Polypropylene Bags and Master Corrugated Boxes”

2.        The description of import item at Sl. No. 1(b) (with quantity) shall be deleted.          


-:17:-

Annexure “B” to the

Public Notice No. 23

Dated: 10/09/2003

CHEMICALS AND ALLIED PRODUCTS

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A3231

Hydroxy Propyl Methyl Cellulose Phthalate Phthalyl content (27+/-7%)

1 kg

1.        Hydroxy Propyl Methyl Cellulose

2.        Phthalic Anhydride

0.973 kg

0.270 kg

A3232

Reactive Blue 221 (Reactive Blue BRX)

1 kg

1.        Cyanuric Chloride

2.        N-Ethyl Meta Base Ester

0.187 kg

0.310 kg

A3233

Multi-layer Plastic laminated Tubes with/ without Caps (5 layer printed)

1 kg

1.       Relevant Plastic laminated Film (Core of Aluminium Foil covered on both sides with plastic film)

2.       U.V. Ink

3.       U.V. Varnish

1.12 kg/kg content in the export product

0.5% of weight of Multilayer film in the export product

0.3 of weight of Multilayer film in the export product

A3234

Cyclopentyl Bromine

1 kg

1.     Cyclo Pentane

2.     Hydrobromic Acid 48%

             OR

    Hydrobromic Acid

    47%

0.634 kg

1.617 kg

1.652 kg

-:18:-

A3235

Polyolefin Amide Alkeneamine – A Dispersant Additive for Lubricating Oil containing base oil 40% and Polybutene Succinic Anhydride Ethylene Amine condensed component – 60%

1 kg

1.        Polybutene

2.        Maleic Amine

3.        Ethylene Amine

4.        150 Solvent Neutral (Mineral Oil)

5.        Diatomaccous Earth (Filter add)

0.520 kg

0.0569 kg

0.0310 kg

0.400 kg

0.0007 kg

A3236

SBR Latex (50% Solid content)

1 kg

1.        1, 3-Butadiene

2.        Styrene Monomer

3.        Acrylic Acid

4.        Anionic Surfactant (i.e. Dowfax 2 A1 & Calfax DB-45)

5.        Tertiary Dodecyl Mercaptan

6.        HDPE (Packing material)

0.186 kg

0.280 kg

0.019 kg

0.014 kg

0.00075 kg

As per packing policy

A3237

Flush Cyan for Printing Ink containing Pigment minimum 42% and Solid Resin 37%

1 kg

1.        Pigment Cyan namely Pigment Phthalocyanine Blue 1450/Pigment Copper Phthalocyaine Blue /Copper Phthalocyaine Crude (PCB Free) (CI No. 74160) (Pigment Blue 15)

2.        Printing Ink Vehicle – Plain (Solid content 64-68%)

3.        Soya Long Oil Length Alkyd Resin of 70% Oil Length having Solid content 100%

0.42 kg

0.415 kg

0.095 kg

-:19:-

     

4.        Petroleum Distillate (Distillation Range 240 Degree – 330 Degree Celsius)

5.        Olyl Alcohol

6.        Antioxidant

0.035 kg

0.021 kg

0.0057 kg

A3238

Lubricating Oil Additive (200 TBN) containing Calcium Dodecyl Phenate 40% Min. and Polybutene Succinic Anhydride 4.5%

1 kg

1.        Dodecyl Phenol

2.        150 Solvent Neutral

3.        Polybutene

4.        Hydrated Lime

5.        Filter Aid (Diatomaceous Earth)

0.367 kg

0.387 kg

0.042 kg

0.141 kg

0.015 kg

A3239

Propanthlene Bromide

1 kg

1.        Xanthenoic Acid

2.        Di-Isopropyl N-ethyechloride amine Hcl. (DIPC Hcl)

3.        Methyl Bromide

4.        Sodium Carbonate

5.        Sodium Sulphate

6.        Chloroform Tech.

7.        Methyl Ethyl Ketone

8.        Activated Charcoal

0.625 kg

0.55 kg

0.30 kg

0.35 kg

0.100 kg

4.50 kg

5.97 kg

0.02 kg

-:20:-

Annexure “C” to the

Public Notice No. 23

Dated: 10/09/2003

ENGINEERING PRODUCTS

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1907

Decanter Centrifuge

1 No.

1.        H.R.S.S. 316 Plate 6 mm Thick for Flight

2.        S.S. 316 Sheet 3 mm Thick for casing assembly

3.        M.S. Box Section

4.        Non Alloy Steel Round Bar

5.        S.S. 316 Bar

6.        Consumable including Hard Surfacing Powder

7.        Component

1.7 kg/kg content in export product

1.2 kg/kg content in export product

1.01 kg/kg content in export product

1.7 kg/kg content in export product

1.01 kg/kg content in export product

1% of FOB value

As per General Note No.4 for Engg. Product inserted by Public Notice No. 46 dated 06.11.2002

-:21:-

C1908

Industrial Separator

1 No.

1.        Stainless Steel Sheet of relevant grade

2.        S.S. Round Bar of relevant grade

3.        Component

1.30 kg/kg content in the export product

1.70 kg/kg content in the export  product

As per General Note No.4 for Engg. Product inserted by Public Notice No. 46 dated 06.11.2002

C1909

Lightening Arrestor (Surge Arrestor) Distribution Class

1 No.

1.        Tubular Porcelain Bushings

               OR